AIM:
To determine the
compressive strength of concrete cylinders.
APPARATUS:
1.
Compression testing machine,
2. cylinder mould of 150mm
diameter and 300mm height.
PROCEDURE:
(i) Cast the cylinder and cure for 28 days.
(ii) Takeout the
specimen from the curing tank.
(iii) Wipe out the excess water from the surface of specimen.
(iv) Place the specimen vertically on the platform of
compression testing machine.
(v) Apply the load continuously and uniformly without shock at
the rate of 315 kn/min. And continue the loading until the specimen fails.
(vi) Record the maximum load taken.
NOTE:
Test at least 3 specimens.
Report
Date of casting :
Date of testing :
Age of specimen :
Curing condition :
CALCULATIONS:
Range Calculation
Characteristic compressive strength at 28 days = N/ mm2
Area of cross
section = pi.d2
Expected load = stress x area xf.s =
Range to be selected is……………………
COMPRESSIVE STRENGTH:
Maximum load =
Compressive strength = (Maximum load/ Cross sectional area)
RESULT:
Compressive strength of
cylinder =…………………….N/mm2
No comments:
Post a Comment